HueForge Gohan SSJ2

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x112.5mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kexcelled Light Orange Transmission Distance: 8 PLA Kexcelled Fluorescent Yellow Transmission Distance: 8 PLA Kexcelled White Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Orange At layer #14 (1.2mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest.