Hueforge Gojo Galaxy

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 181.42x199.52mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA Black Transmission Distance: 0.6 PLA Blue Transmission Distance: 4 PLA Light Blue Transmission Distance: 4 PLA White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.56mm) swap to Blue At layer #13 (0.96mm) swap to Light Blue At layer #15 (1.12mm) swap to White for the rest.