Hueforge Goku

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.54x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Overture Matte Red Transmission Distance: 2.5 PLA Overture Light Gray Transmission Distance: 0.7 PLA Overture White Transmission Distance: 4.4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #11 (0.96mm) swap to Light Gray At layer #14 (1.2mm) swap to White for the rest.