HueForge Goku SSJ

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 107.99x215.6mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 1.9mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #9 (0.8mm) swap to Orange At layer #18 (1.52mm) swap to White At layer #21 (1.76mm) swap to Yellow for the rest.