HueForge Hummingbird

Try out this hummingbird generated using HueForge software! Play around with different colors and swap heights to customize the look. Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: Polymaker Black Transmission Distance: 0.5 Polymaker Blue Transmission Distance: 2 Polymaker Yellow Transmission Distance: 8 Polymaker White Transmission Distance: 6Swap Instructions: Black until layer #9 at 0.8mms Blue until layer #12 at 1.04mms Yellow until layer #20 at 1.68mms White until layer #24 at 2mms(Filament transmission distances approximated) For additional help, check out the #filament-painting channel in the Polymaker Discord