Hueforge Hydrangea Bookmark

Here's another Hueforge bookmark I created. I hope you enjoy! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA Protopasta Moonstruck White Satin Transmission Distance: 10 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Gray At layer #14 (1.2mm) swap to Moonstruck White Satin At layer #17 (1.44mm) swap to Jade White for the rest.