Hueforge Ikky Fenix

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x245.26mm in size Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA Smart_Recycled Amarillo Transmission Distance: 9.3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA Smart_Recycled Blanco Transmission Distance: 6.4This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Amarillo At layer #24 (2mm) swap to Orange At layer #25 (2.08mm) swap to Red At layer #26 (2.16mm) swap to Blanco for the rest. Imprima al 100% de relleno con una altura de capa de 0,08 mm y una capa base de 0,16 mm El modelo tiene un tamaño de 200x245,26 mm. Filamentos utilizados: PLA BambuLab Basic Negro Distancia de transmisión: 0,6 PLA BambuLab Basic Rojo Distancia de transmisión: 4 PLA Smart_Recycled Amarillo Distancia de transmisión: 9.3 PLA BambuLab Basic Naranja Distan