Hueforge Inception

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 225x126.54mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue Gray At layer #16 (1.36mm) swap to Beige At layer #24 (2mm) swap to Jade White for the rest. My first Hueforge and more to come in the future Light colors will work well with shading and should be interchangable if light enough This hueforge is thick and not paper thin. I perfer hueforges to be thicker and more durable Show off your other colors with this