Hueforge Jinx

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x118.68mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA BambuLab Basic BlackPLA BambuLab Basic BluePLA BambuLab Silk BluePLA BambuLab Basic RedPLA BambuLab Basic Jade WhiteThis print uses 5 unique filamentsSwap Instructions:Start with Black At layer #10 (0.88mm) swap to Blue At layer #14 (1.2mm) swap to Si