Hueforge Joker

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #6 (0.56mm) swap to Blue Gray At layer #10 (0.88mm) swap to Scarlet Red At layer #13 (1.12mm) swap to Ivory White for the rest.