Hueforge - Kriss Vector X-Ray

von Sweezy_Bologna1 · 2D Art

21 Downloads

12 Likes

2 Makes

Thank you for checking out my Hueforge. Please consider leaving a Like and Share!Boost MeBoosts are always appreciated :) Hueforge - Kriss Vector X-Ray Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x118.27mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #13 (1.12mm) swap to Gray At layer #20 (1.68mm) swap to Jade White for the rest. Enjoy!

krissvector vector pewpew 2d 2D 2d 3d 3d 3D 3d 3d art x-ray xray picture 2a freedom HUEFORGE HueForge Hue Forge hue

Kategorie

2D Art

Quelle

MakerWorld

Veröffentlicht

29.11.2024

Aktualisiert

30.04.2026

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Hueforge - Kriss Vector X-Ray

Ähnliche Modelle

Zur Sammlung hinzufügen