Hueforge Live To Ride

Project: Live To Ride.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 154.08x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled White Transmission Distance: 5.7 PLA Smart Recycled Red Transmission Distance: 4.4 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Black At layer #10 (0.88mm) swap to White At layer #20 (1.68mm) swap to Red At layer #24 (2mm) swap to White for the rest