hueforge loup

The Model is 200x133.33mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 6 unique filamentsSwap Instructions: Start with Blue At layer #8 (0.72mm) swap to Black At layer #10 (0.88mm) swap to Gray At layer #13 (1.12mm) swap to Orange At layer #15 (1.28mm) swap to Jade White At layer #20 (1.68mm) swap to Yellow for the rest. commencer par le bleuà la couche 8 changer pour le noirà la couche 10 changer pour le grisà la couche 13 changer pour le orangeà la couche 15 changer pour le blancà la couche 20 changer pour le jaune pour le reste