Hueforge lucario

Project: lucario v1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Cyan Transmission Distance: 8 PLA BambuLab Basic Turquoise Transmission Distance: 1.6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Cyan At layer #19 (1.6mm) swap to Turquoise At layer #21 (1.76mm) swap to Jade White for the rest.