Hueforge luffy one piece

Project: luffy4.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50.42x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.7mm Filaments Used: PLA 3dhojor matte black Transmission Distance: 0.6 PLA 3dhojor White Transmission Distance: 2.6 This print uses 2 unique filaments Swap Instructions: Start with matte black At layer #14 (1.2mm) swap to White for the rest.