HueForge Mandalorian

I generated a 3 color STL of the Mandalorian with the amazing HueForge program. I used greyscale but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.The print details and layers filament changes are in the describe note file as well as bellow.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA PolyLite Grey Transmission Distance: 1PLA PolyLite White Transmission Distance: 5Swap Instructions:Black until layer #7 at 0.64mmGrey until layer #16 at 1.36mmWhite for the rest. The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS. Keep and eye out if your interested in more HueForge models I plan to upload many more.Thanks