HueForge Mandalorian

Another one HueForge Picture Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Gray At layer #11 (0.96mm) swap to Ash Gray At layer #18 (1.52mm) swap to Jade White for the rest.