HueForge Mandalorian

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x114.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Gray At layer #13 (1.12mm) swap to Orange At layer #17 (1.44mm) swap to Yellow At layer #21 (1.76mm) swap to White Border Only Colors from here until the end. At layer #28 (2.32mm) swap to Black for the rest. For those with one AMS. When Gray is finished, replace it with White and use White and Gray from the same Slot.