Hueforge Mario

Voici un tableau Hueforge Mario j'espère qu'il vous plaira ! Veuillez ne pas modifiez le Z pour cause de problème de couleurs. Imprimé avec des bobines Bambu lab et Sunlu Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 176.31x235mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 3.2mm and the Actual Depth is 3.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Sunlu Matte Blue Transmission Distance: 3 PLA+ Sunlu Red Transmission Distance: 6 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu Skin Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #19 (1.6mm) swap to Yellow At layer #20 (1.68mm) swap to Ba