HueForge Meme

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PETG BambuLab Black Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Marine Blue At layer #6 (0.56mm) swap to Black At layer #11 (0.96mm) swap to Red At layer #12 (1.04mm) swap to Jade White for the rest.