Hueforge Mirko Cover

Wanted to learn more about Hueforge, so heres my first print of Mirko from BNHA. Here are the settings taken from Hueforge:Project: mirko cover.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.98x176.4mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Matte Lilac Purple Transmission Distance: 2PLA BambuLab Matte Latte Brown Transmission Distance: 2PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filaments Swap Instructions:Start with CharcoalAt layer #8 (0.72mm) swap to Lilac PurpleAt layer #18 (1.52mm) swap to Latte BrownAt layer #24 (2mm) swap to Ivory White for the rest.