Slicer Discord
Hueforge: Monalisa – 3D-Druckmodell von MakerWorld MakerWorld
Hueforge & Lithophane

Hueforge: Monalisa

35 Downloads
30 Likes
3 Makes
Zum Modell
Hello guys. This is a hueforge art originate from Leonardo da Vinci‘s famous Monalisa. I made this hueforge from 6 colors. I have tried many combinations of 4 colors, but they all performed poorly, so it has to be made of 6 colors even I really want to avoid it. Luckily there is a solution for this. If you don't use AMS, just change the color as the instruction down below. As for AMS users, slice the model in the software and change the filament at the correct layer if you have 2 AMS. If however you have only one AMS, I have a video from the creator of hueforge about how to print more than 4 colors with only one AMS. Check it out here. (the method is shown at 12:20 in his video). As always, print it with 100% infill, base layer height 0.16mm and layer height of 0.08mm. Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to GreenAt layer #9 (0.8mm) swap to BrownAt layer #11 (0.96mm) swap to Ice BlueAt layer #13 (1.12mm) swap to YellowAt layer #14 (1.2mm) swap to Jade White for t
Kategorie
Hueforge & Lithophane
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
6 Farben
Einteilig 6 Farben / AMS
Supports 1/3
Zusammenbau 0/3
Einstellungen 3/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Farben
6 (AMS/MMU empfohlen)
Nachbearbeitung
Bemalen
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

2 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen