Hueforge Monstertruck

My 3 years old son likes 3D Printing and cars. So this was the perfect small project on a cold and wet weekend. The Hueforge details are here: Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mmThe Model is 150x100.06mm in sizeYou may print at higher layer heights below the Min Depth of 0.34mmThe Max Depth is 2mm and the Actual Depth is 1.6mmFilaments Used: PLA F4P schwarz Transmission Distance: 0.1 PLA F4P light gray Transmission Distance: 3.2 PLA BambuLab Basic Gray Transmission Distance: 1.4 PLA Bambulab White Transmission Distance: 6.5This print uses 4 unique filamentsSwap Instructions: Start with schwarz At layer #11 (0.76mm) swap to light gray At layer #14 (0.94mm) swap to Gray At layer #17 (1.12mm) swap to White for the rest. Boost Meyou like it. Send me a motivation to upload more ;-)