Hueforge Moonlight

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA sunlu+ Black Transmission Distance: 0.3 PLA sunlu+ Gray Transmission Distance: 2.5 PLA Ouverture Light Gray Transmission Distance: 3 PLA sunlu+ White Transmission Distance: 6Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Gray At layer #15 (1.28mm) swap to Light Gray At layer #23 (1.92mm) swap to White for the rest.