HueForge Mouth

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x192mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #ff5869 PLA BambuLab Basic Pink Transmission Distance: 8 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 3 unique filaments Tray 1 : Instructions de changements: Commencer par Charcoal At layer #8 (0.72mm) swap to Pink At layer #13 (1.12mm) swap to Red At layer #15 (1.28mm) swap to Ivory White pour le reste. Tray 2 : Instructions de changements: Commencer par Charcoal At layer #10 (0.88mm) swap to Pink At layer #18 (1.52mm) swap to Ivory White pour le reste.