hueforge naruto

Project: naruto10.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50.42x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.4mm and the Actual Depth is 1.8mmFilaments Used: PLA 3dhojor matte black Transmission Distance: 0.6 PLA sunlu matte white Transmission Distance: 4.7This print uses 2 unique filamentsSwap Instructions: Start with matte black At layer #14 (1.2mm) swap to matte white for the rest.