MakerWorld
Hueforge & Lithophane
Vai al Modello
Hueforge Olise
24
Download
16
Likes
3
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 139.68x256.35mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #d73737 PLA Kingroon Red Transmission Distance: 4.2 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #11 (0.96mm) swap to White for the rest.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
