Hueforge - One Piece (Monkey D Luffy)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA Default White Transmission Distance: 5Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Lemon Yellow At layer #20 (1.68mm) swap to White for the rest.