Hueforge One Piece

Hueforge One PieceBoost MeBoost Me Please :p:dProject: Familly One Piece.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x140.58mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Sunlu Dark Grey Transmission Distance: 0.2 PLA Sunlu Red Transmission Distance: 3.5 PLA eSun Yellow Transmission Distance: 4.9 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA Sunlu + Green Transmission Distance: 3 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5This print uses 8 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Grey At layer #10 (0.88mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #15 (1.28mm) swap to Marine Blue At layer #18 (1.52mm) swap to Green At layer #21 (1.76mm) swap to Mandari