Hueforge Owl

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x142.86mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Overture Black Transmission Distance: 0.1 PLA Esun epla matte milky white Transmission Distance: 2.6 PLA Eryone Agate Grey Transmission Distance: 1.2 PLA Eryone Signal grey Transmission Distance: 2.9This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to epla matte milky white At layer #17 (1.44mm) swap to Agate Grey At layer #19 (1.6mm) swap to Signal grey At layer #20 (1.68mm) swap to epla matte milky white for the rest.