hueforge Pepe

Hueforge creation of the classic meme Pepe! no AMS needed print by layer filament painting. no commercial use. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200.01x150.13mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Brown At layer #16 (1.36mm) swap to BambuLab Green At layer #19 (1.6mm) swap to Jade White for the rest.