Hueforge Pizza Zone

Hueforge Pizza ZoneBoost MeBoost me please :p:dProject: PIZZA ZONE.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 245x163.74mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA Sunlu + Green Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA Sunlu White Transmission Distance: 7This print uses 5 unique filaments Swap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Green At layer #15 (1.28mm) swap to Red At layer #21 (1.76mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!!