Hueforge print

Bambu labs 3d print from a 2d image. Swap Instructions: Start with black At layer #12 (1.04mm) swap to grey At layer #13 (1.12mm) swap to red At layer #14 (1.2mm) swap to orange At layer #16 (1.36mm) swap to yellow At layer #19 (1.6mm) swap to off white At layer #25 (2.08mm) swap to White for the rest. The Model is 222.25x200.82mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.5mm and the Actual Depth is 2.2mm You may have to make other small adjustments with the hueforge model geometry section. Made with a Bambu Lab X1C