Hueforge pulp fiction

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x94.64mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments I used: (but any black and white will be ok)PLA + eSun black mattePLA + eSun whiteThis print uses 2 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to White for the rest. Boost Me