Hueforge Punisher

Hope you enjoy it is my first hueforge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA Generic Black Transmission Distance: 5 PLA Generic Red Transmission Distance: 5 PLA PolyTerra Muted White Transmission Distance: 0.5 PLA Generic Yellow Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Muted White At layer #19 (1.6mm) swap to Yellow for the rest.