Hueforge Ramstein

Project: Ramstein.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.5mm and the Actual Depth is 2.6mm This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #18 (1.52mm) swap to Yellow At layer #22 (1.84mm) swap to White for the rest.