Slicer Discord
Hueforge retro game – 3D-printbaar model van MakerWorld MakerWorld
Hueforge & Lithophane

Hueforge retro game

457 Downloads
378 Likes
222 Makes
Model downloaden
Hueforge retro game Choose your profile carefully: white or yellow.Boost MeBoost me please, it's free :)MembershipThank you for supporting me in my work. Project: game.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 225.85x230mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.6mm and the Actual Depth is 1.5mm Filaments Used: PLA BambuLab Matte Charcoal PLA BambuLab Basic YellowThis print uses 2 unique filaments Swap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!! Non-commercial !!! Non-commercial !!! Non-commercial !!!
Categorie
Hueforge & Lithophane
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
grote print
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 2/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Min. bedgrootte
230 mm (Groot)
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie