Hueforge RICARD

Hueforge RICARDThere is a version with a hole and a version without a holeThe variation in colorimetry in the different photos is due to them being taken at different times of the day.Boost MeBoost Me Please :p:dProject: RICARD.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 176.87x245mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 3.3mm and the Actual Depth is 3.4mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA Sunlu + Sky Blue Transmission Distance: 5.2 PLA Sunlu + Green Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA Sunlu White Transmission Distance: 7This print uses 6 unique filaments Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Sky Blue At layer #14 (1.2mm) swap to Green At layer #18 (1.52mm) swap to Red At layer #25 (2.08mm) swap to Yellow At layer #32 (2.6