Hueforge ROCKY

Hueforge ROCKYBoost Meboost me please :pMembershipThank you for supporting me in my work. Project: ROCKY.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 145.16x230mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.6mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA Sunlu White Transmission Distance: 7This print uses 3 unique filaments Swap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to YellowBorder Only Colors from here until the end. At layer #17 (1.44mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!!