Hueforge romantic lovers 2

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x258.9mm in sizeResize modell to 170X219,98X2,35mm.You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Silver Transmission Distance: 0.5PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #12 (1.04mm) swap to Blue GrayAt layer #14 (1.2mm) swap to SilverAt layer #16 (1.36mm) swap to White for the rest.