Hueforge romantic lovers

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x258.9mm in sizeResize modell to 170X220,15X2,35mm.You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Blue Gray At layer #14 (1.2mm) swap to Silver At layer #16 (1.36mm) swap to White for the rest.