Hueforge Rose Lion

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.4mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PETG JAYO Black Transmission Distance: 0.3 PETG JustMaker Brown Transmission Distance: 1.5 PETG Sunlu Red Transmission Distance: 7.5 PETG TPOIMNS Yellow Transmission Distance: 6.5 PETG JAYO White Transmission Distance: 6This print uses 6 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #39 (1.68mm) swap to Black At layer #43 (1.84mm) swap to Brown At layer #44 (1.88mm) swap to Red At layer #46 (1.96mm) swap to Yellow At layer #51 (2.16mm) swap to White for the rest.