hueforge sasuke

Project: sasuke.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.54x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #16 (1.36mm) swap to WhiteBorder Only Colors from here until the end. At layer #19 (1.6mm) swap to Indigo Purple for the rest.