Hueforge Saw

Project: Saw2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141x200 mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 2.5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #10 (0.88mm) swap to Red At layer #17 (1.44mm) swap to Blue Gray At layer #19 (1.6mm) swap to Jade White for the rest.