hueforge security dogs

another try on making a hueforgedidn t had all the right colors but came out pretty well i think Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x199.72mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Blue Gray At layer #11 (0.96mm) swap to Grey At layer #20 (1.68mm) swap to Jade White for the rest.