hueforge shark

Project: squalo2 denti bianchi.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.6x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.3 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu Sky Blue Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #15 (1.28mm) swap to Silver At layer #17 (1.44mm) swap to Sky Blue At layer #22 (1.84mm) swap to Jade White for the rest.