Hueforge Spiderman

Project: Spider-Man.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm  The Model is 200x112.3mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #18 (1.52mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest.