Hueforge - Stranger Things

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Red Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Dark Blue At