HueForge TD test - 15 step

Adjusted size = increased to 55 x 55 mm than orginal.15 steps is enough for most filaments. Print at 100% infill (ALIGNED RECTILINEAR settings) with a layer height of 0.08mm with a base layer of 0.16mm.Top/bottom shell layers = 0The model must be rotated on the base by an angle of 45° (print lines). Choose the first color according to the tested filament. For dark - white. For light colors - black. Start with Black/WhiteAt layer #12 (1.04mm) swap to “your testing color” for the rest. Calculating TD is simple.Find when the color is already "full" on the finished test.Count how many positions are lighter from the start to this (first solid color box) point.One box TD value "0.8" (0.08 layer *10) => the TD value for the filament (HueForge settings) is always a unit of millimeters!Verification and "tunning" in HueForge SW.Open the source - .stl test file in HF.Set a new filament (or select from here).Set the filament color HEX/RBG value according to the manufacturer