Hueforge - The Witcher (Geralt)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA Default White Transmission Distance: 5Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #9 (0.8mm) swap to Ash Gray At layer #16 (1.36mm) swap to White for the rest.